We are the largest, fastest producer of
cast metal prototypes in the U.S.A.
 |
 |
| Phone: 763-788-6965 | |
We are the largest, fastest producer of
cast metal prototypes in the U.S.A.
|
|
| Phone: 763-788-6965 | |
"Your ideas become reality – with speed and precision"
Toggle View: Production Process | Prototype Process
Wax Injection |
Pattern Removal |
Wax Assembly |
|
|
|
The first step in the investment casting process is to produce a wax replica of the desired part. This is accomplished by injecting wax or plastic into a die cavity |
After injection, the wax replica is removed from the injection tool. Parts are inspected for tolerance and then cleaned for assembly |
Replicas are "wax welded" to a central sprue or cluster to facilitate pouring. Many replicas are attached to sprues for increased efficiency |
Shell Building |
De-Waxing |
|
|
|
|
The assembled prue is then dipped or "invested" in into a ceramic slurry. After draining, the sprue is then coated or "stuccoed" with a fine ceramic sand. This process is repeated several times using progressively coarser grades of ceramic material to "build" sufficient "shell" strength. |
The shell built sprue is then de-waxed by rapidly heating in a furnace or autoclave leaving behind the perfect shell cavity. |
|
Preheating Shell |
Pouring |
Part Finishing |
|
|
|
The shells are then fired at 1600° to 2000°. This cures the shells interior into smooth, hard and strong ceramic material. |
The hot sprues are then removed from the furnace and poured immediately. The poured shells are then set aside to cool. |
When cool the shell material is stripped away from the sprue. Parts are then cut from the sprue |
